電線電纜網 > 專業英語|國際貿易 > 求助翻譯UL817溫升測試條文（完整版）
求助翻譯UL817溫升測試條文 - 無圖版
vhctc --- 2011-03-25 21:02:36
1
TEMPERATURE TEST, UL 817 87
METHOD
Cord Size (AWG) | Cord Type | Test Current (A) |
18 | SPT-2-R | 2.5 |
18 | SPT-2-R | 5.0 |
Six samples of Cat. No. SY-18 molded on Flexible Cords as tabulated above were placed in series and the blades of each sample shorted by a 14 AWG bare copper conductor (solid) to form a series circuit. Current was adjusted in circuit to the above specify test current using a low-voltage ac source and was allowed to operate until temperatures stabilized (minimum of 4 h). Thermocouples were used to record temperatures on blades.
［vhctc 在 2011-3-25 23:18:07 編輯過］
［vhctc 在 2011-3-25 23:19:26 編輯過］
carlytau --- 2011-03-29 10:24:03
2
溫度測試 ，18號線，線束類型：SPT-2-R,測試電流：2.5A & 5A
6條18號線束樣板如上表格中所列，組成串聯電路，每條樣板刀片接一條單裸銅14號線形成一個串聯電路，用低壓交流電源操作來調整電路中的電流，直到溫度趨于穩定（最少為4小時)，電熱偶用來 記錄刀片上的溫度變化。
偶也是新手，正在學習中，可能很多地方不專業或不準確，多多指教
vhctc --- 2011-03-29 15:15:31
3
jasonkingz --- 2012-05-05 12:30:08
4
rooneyfly --- 2012-08-30 14:27:42
5
來學習下，謝謝！