1
UL1007的22AWG線材的內芯是0.15*17股裸銅,請問光從內芯看合格嗎?
還有請問一下這個標準哪有下載?
萬分感謝。!
2
你可以要求你的供應商提供線材的規格書,也可以參照別家公司擔供的規格書來檢驗
這種標準的規格我們公司都很少檢的,供應商連這種材料都要懷疑的話那當初為什么要選用
3
從截面來算已經不合格,具體可參照UL 758 表52,導體的外形尺寸。
但是要判斷此導體是否合格,最終還是要測量導體電阻是否合格。
4
5
6
UNDERWRITERS LABORATORIES INC. APPLIANCE WIRING MATERIAL
Subj. 758 Section 1 Page 1007 Issued: 1959-05-01
Revised: 2002-12-05
Style 1007 Polyvinyl Chloride Insulated Wire.
______________________________________________________________________________
Rating 80°C, 300 V.
______________________________________________________________________________
Conductor 32-16 AWG, solid or stranded.
______________________________________________________________________________
Insulation Polyvinyl Chloride, 15 mils minimum average,
13 mils minimum at any point, 60 or 80°C in oil,
if applicable.
______________________________________________________________________________
Standard Appliance Wiring Material UL 758.
______________________________________________________________________________
Instructions Detailed Examination.
to UL Physical Properties, Unaged.
Representative Spark Test.
______________________________________________________________________________
UL (4) Detailed Examination.
Counter-Check (4) Physical Properties.
Program (4) Heat Shock.
(4) Cold Bend
* (4) Deformation.
* (12) Horizontal Flame Test.
______________________________________________________________________________
Marking General.
______________________________________________________________________________
Use Internal wiring of appliances; or where exposed to oil
at a temperature not exceeding 60°C or 80°C, whichever
is applicable. Tags may indicate the following:
600 V Peak - For Electronic Use Only.
7
8
一般都用17/0.16TS
9
10
11
12
肯定不合格啦!應該是17/0.16的