1
近期在做UL3386認證，哪位大俠那里可以生產��？提供下膠料廠家。
另外如果說將UL3386認證與vde的H07Z-K認證合并即同一款線材同時滿足UL 要求 VDE要求，是否有膠料滿足呢？
2
3
4
5
Color | PANTONE Code | Chromatic aberration(│ΔE│) | Test method |
Red | PANTONE | ≤4.0 | DKBA 4023-2007.10 |
Yellow | PANTONE | ≤4.0 | |
Blue | PANTONE | ≤4.0 | |
Green | PANTONE | ≤4.0 | |
Black | PANTONE | ≤4.0 | |
Color | PANTONE Code | Chromatic aberration(│ΔE│) | Test method |
Brown | PANTONE | ≤4.0 | DKBA 4023-2007.10 |
Gray | PANTONE | ≤4.0 |
4.2 Insulation
Tensile Strength: ≥10.3MPa
Elongation: ≥150%
Tensile Strength: ≥10MPa
Tensile Strength Variation: ≤30%
Elongation: ≥125%
Elongation Variation: ≤30%
4.3 Cold Bending
Condition:
No Crack
4.4 Cold Impact Test
Condition:
No Crack
4.5 Heat Shock
Condition: 136±
No Crack
4.6 Deformation Resistance
Condition:
Result:≤50%
4.7 Flammability
IEC 60332-1 IEC 60332
4.8 Temperature
Rated temperature:
Minimum installation temperature:
Minimum Operation Temperature :
Minimum Storage Temperature:
5 Electrical Characteristics
5.1 Dielectric Strength
Condition:AC,2.5 kV,15min
Result: no break
5.2 Other Electric parameter
See Table 1
6 Environment Requirements
6.1Burning occur gas acidity PH≥4.3 （IEC 60754-2）
6.2Acid gas release mounts ≤5 mg/g （IEC 60754-1）
6.3Burning release gas photic rate ≥60% （IEC 61034-2）
6.4 Burning occur the conductivity value≤10μS/mm（IEC 61034-2）
6.5Meet the standard of RoHS
我上傳了該材料的性能，哪個廠家的料可以達到這個性能，最小截面要做到16AWG 請留下聯系方式
6
請各位多多幫幫忙！
7
哪個是做材料的 看看能不能做到啊/?
8
9
10