1
各位大蝦,想請教一下,UL1571線材是怎樣設計的,芯線的大小,銅線的絞距,和外被的最小絕緣厚度和最大絕緣厚度是怎么樣來決定的,絕緣的材質是什么?有沒有這方面相關的資料可以給小弟參考一下,要中文版的,如哪位大哥,大姐有這方面的資料可以在這上面指導,也可以發EM給我,EM:1133052@163.COM,不勝感謝!
2
多看看UL758就OK了
3
是但到論壇去下U758了解即可;
被人給你的不是很權威,是他人的經驗所以建議自己去找這樣記憶比較深刻.
1571 在 UL758 STYLE PAGE 里面找.具體規格要求會寫的很詳細;
4
| 品名 | 定格 | 導體(錫~軟銅線) | 絕緣體 | 抗體 | 絕緣抵抗 | 絕緣耐壓 | ||||
| 溫度 | 電壓 | AWG | 構成 | 外徑 | 厚 | 外徑 | ||||
| 1571 | 80 | 30 | 36 | 7/0.05 | 0.15 | 0.15 | 0.45 | 1374 | 15 | 500 |
| 32 | 7/0.08 | 0.24 | 0.15 | 0.54 | 589 | |||||
| 30 | 7/0.1 | 0.3 | 0.2 | 0.7 | 377 | |||||
| 28 | 7/0.127 | 0.38 | 0.25 | 0.88 | 237 | |||||
| 26 | 7/0.16 | 0.48 | 0.25 | 0.98 | 149 | |||||
| 24 | 7/0.203 | 0.61 | 0.25 | 1.11 | 93.3 | |||||
| 22 | 7/0.254 | 0.76 | 0.27 | 1.3 | 55 | |||||
5
一般絕緣用半硬PVC,如果絕緣很薄的話，半硬PVC要特殊生產。因為容易絕緣回縮，破裂。
6
7
我有。
8
9
我給你758中文版
10
UL1571標準要求：
UNDERWRITERS LABORATORIES INC. APPLIANCE WIRING MATERIAL
Subject 758 Section 1 Page 1571 Issued: Dec. 27, 1972
Revised: Nov. 15, 2000
Style 1571 PVC Insulated Cable.
______________________________________________________________________________
Rating 80°C, 30 V.
______________________________________________________________________________
Conductor 50 AWG min. Material and stranding not specified.
______________________________________________________________________________
Insulation Solid or cellular PVC, or semi-rigid PVC, 2 mils min at any
point, 100 mils max. Irradiation optional.
______________________________________________________________________________
Covering Extruded PVC, Polyamide, ETFE, or Polyester 2 mils min at
(Optional) any point, or lacquered braid Irradiation optional.
______________________________________________________________________________
*Shield Optional.
(Optional)
______________________________________________________________________________
Jacket Same as covering.
(Optional)
______________________________________________________________________________
*Shield Optional.
______________________________________________________________________________
Covering Optional, same as covering.
______________________________________________________________________________
*Standard Appliance Wiring Material UL 758.
______________________________________________________________________________
Instructions Detailed Examination.
to UL
Representative
______________________________________________________________________________
UL (4) Detailed Examination.
*Counter-Check (4) Horizontal Flame Test.
Program
______________________________________________________________________________
*Marking General.
______________________________________________________________________________
Use Internal Wiring of Class 2 Circuits in electronic equipment.
11
12
不要光照著理論上的數據去做，這類線一般被用在沖電器的聯接線，是要有屈曲強度要求的哦，電線好做，如果要滿足屈曲測試的要求，恐怕沒那麼簡單吧~~！嘿
13
14