電線電纜網 > 國外線纜 > UL電線表面印字是否有標準其一排字后之間間距是否有標準？（完整版）
UL電線表面印字是否有標準其一排字后之間間距是否有標準？ - 無圖版
46802986 --- 2008-05-24 08:32:06
1
UL電線表面印字是否有標準其一排字后之間間距是否有標準？
xj168 --- 2010-01-21 22:34:25
2
有標準可查, 最大600MM
yangshan --- 2010-01-22 19:02:48
3
學習中
白欣 --- 2010-02-21 16:11:26
4
我怎么沒看見過對印字間隔的要求條款呢？誰要是找到了，交流一下。
tcable.com --- 2010-02-26 15:13:55
5
在哪里標準，等否具體下？xj168:
有標準可查, 最大600MM
alan79114 --- 2010-03-04 15:57:25
6
完整的印字內容要在1米內體現，其它并沒有規定。此要求可以在跟蹤服務細則的Sec.Gen部分查到，例如：
For products meeting only Canadian requirements, surface printing is required for finished products having an overall diameter of 1.3 mm and larger. A finished product shall have a distinctive marking throughout its entire length by which it may be readily recognized as the product of a particular factory. The marking shall consist of surface printing, indent‑marking, embossing, colored threads, or printed tape. If the marking is not continuous, it shall appear at intervals of not more than 1 m. A finished product of Appliance Wiring Material shall also be legibly and durably identified with the following marked at intervals not more than 1 m:bluecui --- 2010-03-06 10:39:08
7
厲害啊，學習了
onewindy --- 2010-04-24 14:28:34
8
很不錯，學習了。
夜雨 --- 2010-04-26 13:29:25
9
english?
ceteight --- 2010-04-27 16:56:19
10
UL的好像沒有要求吧,3C有要求的
szyt --- 2010-04-27 22:30:37
11
完整的印字內容要在1米內體現，其它并沒有規定
學習了，謝謝
Linus --- 2011-11-21 16:24:00
12
請問這些標準出自哪份標準文件？各有不同的講法，太迷茫了，最近遇一客訴，一定要標準文件，不知哪位大俠知道，非常感謝！
qlm9988 --- 2011-11-24 22:19:36
13
標準在那里啊
cs114cs --- 2014-03-12 13:30:47
14
UL跟蹤細則里有，最大1米左右
daluzou --- 2014-03-13 12:17:52
15
持續跟蹤