1
既然是UL的標準，我想應該會有一個統一的標準吧
但事實卻是，我在網上查了不少，竟然都不統一，真的讓我感到意外不小
誰有這樣的標準，給予分享下！謝謝了!
2
有人知道么？
分享一下�。∥疫�是沒能找到！
3
UNDERWRITERS LABORATORIES INC. APPLIANCE WIRING MATERIAL
Subject 758 Section 3 Page 3239 Issued: 1969-10-13
Revised: 2003-08-21
Style 3239
| High-Voltage Lead Wire.
|
Rating
|
Maximum 200°C and 50 KVDC. See Facing Page for ratings. |
Conductor
|
Nos. 24-10 AWG copper or nickel and Nos. 12-10 AWG aluminium or Nos. 27-20 AWG Resistance Wire; solid or stranded. Or Nos. 24-10 AWG solid or stranded coated high strength copper - min 90% conductivity, for 200°C rating uncoated or tinned strands of copper shall be 0.015 inch or larger in diameter. Aluminium conductors shall be permitted for a 90°C maximum operating temperature. Copper conductors may be tinned, silver or nickel plated, heat bonded or overcoated.
|
Insulation
|
Thermoplastic and/or Thermosetting. See Facing Page for details.
|
Shield
|
Optional, see Facing Page for details. |
Covering
|
Optional, see Facing Page for details.
|
Jacket |
Optional, see Facing Page for details. |
Standard
|
Appliance Wiring Material UL 758. |
Instructions to UL Representative
|
Detailed Examination, see Facing Page. Physical Properties of Insulation, Covering and/or Jacket, unaged. High Voltage DC Dielectric Withstand Method I, unaged, Humidity conditioning 6 hours. VW-1 Flame Test.
|
UL Counter-Check Program
|
(4) Detailed Examination, see Facing Page. (4) Physical Properties of Insulation, Covering and/or Jacket, unaged and after aging. (4) Heat Shock. (4) Shrinkage. (4) Deformation (12) VW-1 Flame Test. (1) High-Voltage Cut-Through Test. (1) High Voltage DC Dielectric Withstand Methods I and II, unaged and after aging. (4) Ozone Resistance Test.
|
(Continued on Page 3239A)
UNDERWRITERS LABORATORIES INC. APPLIANCE WIRING MATERIAL
Subject 758 Section 3 Page 3239A Issued: 1969-10-13
Revised: 2003-08-21
Marking |
General. If the outer surface of the wire is PVC,XLPVC, PVDF, PE, XLPE, XLPO, or glass or cotton braid, the wire shall be surface printed. Surface printing on other materials is optional unless other-wise noted on the facing page.
1. Recognized's Company’s name or E number. 2. Plant identification, if made in more than one location. 3. DC voltage rating. 4. Temperature rating, if above 60°C. 5. Style No. 3239. 6. The Recognized Component Mark followed by the letters AWM or the words, Appliance Wiring Material. 7. (Optional) VW-1.
|
Use
|
Internal wiring of TV receivers or where the acceptability has been determined by Underwriters Laboratories.
|
4
5
6
硅膠高壓線沒有明確的標準，主要是看你認證的證書要求是怎么樣的UL就按照你證書的要求檢驗的
7
誰幫助譯成中文好嗎
8
那位勞駕翻譯一下。謝謝
9
那位勞駕翻譯一下。謝謝
10
的春僅此
11
12