5
我描述一下此電線:護套灰色,護套厚度實際為0.9mm,一共三芯,兩芯為帶絕緣的線芯,顏色分別為黑色與白色,此兩芯繞包了一層金屬箔,一芯是無絕緣的鍍錫銅導線7根,這一根與繞包后的那兩絕緣線芯成纜后擠出護套。銅絲都是用的鍍錫銅絲,從導體直徑來看象是2*1.0+1*0.75 請朋友再重新確認一下是什么線,有人說可能是5號線,對5號線我不懂.請幫忙謝謝!
7
到書店買本字典,或者運用本論壇的在線翻譯版塊。http://dxdlw.com/Eing.asp
呵呵
11
UNDERWRITERS LABORATORIES INC. APPLIANCE WIRING MATERIAL
Subject 758 Section 2 Page 2092 Issued:
Style 2092 Two-Conductor P.E. Insulated and PVC Jacketed Cable
______________________________________________________________________________
Rating
______________________________________________________________________________
Conductors Two 30-16 AWG solid or stranded, tinned or bare copper
page 26.
______________________________________________________________________________
Insulation 15 mils min avg., 13 mils min at any point Polyethylene or
Flame-Retardant Polyethylene
______________________________________________________________________________
Conductor Two individually insulated wires cabled together. The
Assembly length of lay of the twisted wires is not specified.
Fillers may be used in a cable but are not required. A
barrier layer, if employed, may be 10 mils of extruded PVC,
a fibrous wrap serving or braid, paper, nylon, oriented
polyethylene terephthalate, or a thermoplastic-tape wrap.
Such a barrier layer would serve to protect the cable during
further processing and would be applied immediately over the
twisted assembly of individual conductors or groups of
conductors.
______________________________________________________________________________
Shielding Over one or both conductors, Page 24.
(Optional)
______________________________________________________________________________
Jacket PVC: 15 mils min avg., 13 mils min at any point Class 11.
______________________________________________________________________________
Standard Flexible Cord and Fixture Wire
______________________________________________________________________________
Instructions Detailed examination
to UL Physical Properties: (unaged) Insulation:
Representative PE - Page 42, FRPE - Page 43 Jacket - Page 32
Spark Test, 3000 Volts, page 30.
______________________________________________________________________________
(Continued on page
UNDERWRITERS LABORATORIES INC. APPLIANCE WIRING MATERIAL
Subject 758 Section 2 Page
UL (4) Detailed examination.
Counter-Check (4) Physical Properties: Insulation: PE Page 42.
Program FRPE - Page 43, Jacket - Page 33.
(4) Flexibility, page 55.
(4) Cold Bend, page 58.
(4) Flame Test, page 31.
(4) Heat Shock, page 57.
(4) Deformation, Jacket page 38, Insulation page 38 except
at
______________________________________________________________________________
Marking General, page 13.
______________________________________________________________________________
Use Internal Wiring of Electronic Equipment. Tags may indicate
the following: "600 Volts peak for electronic use only."
